Changzhou Machinery Processing Factory Summarizes Knowledge about Pipe Fittings

Changzhou mechanical processing factory and everyone talk about pipe fittings. When it comes to pipe fittings, we are not unfamiliar. We can often come into contact with them in daily life. Although they are very useful in a large scale, they perform poorly in our country. In Japan, there are many types of pipe fittings, regardless of sample or data introduction. If we want to give a definition to pipe fittings, I believe that any product produced through deep processing of pipe fittings should belong to the field of pipe fittings.

Pipe is the raw material required for pipe fittings, but there are many methods for processing pipe fittings, as long as it is mechanically processed, it can be used. Pipe fittings have two prominent advantages: they can replace some machined products, and are lighter in weight than machined parts, castings, and cast structural parts, saving data; The second is to save processes and labor hours compared to machining products, and reduce workpiece costs.

There are many types of pipe fittings, including the following primary types:

A variable diameter pipe fitting refers to a reduction in the diameter of the pipe end or a portion of the pipe;

"Pipe fittings with variable wall thickness" refers to changes in wall thickness along the length of the pipe;

3. Modify the pipe fittings of the cross-section, and change the circular cross-section into square, elliptical, polygonal, etc. as required;

4. For curved pipe fittings, we have a lot of contact, namely, changing straight pipes into bends with different curvature radii, such as elbows, bends, etc;

5. Pipe fittings with flanges and circular edges, the former refers to pipe ends protruding inward or outward, and the latter refers to pipe fittings that form an arch or groove in the circumferential direction of the pipe;

6. For pipe fittings with curling and back sealing, add pipe fittings with the total strength of the pipe end curling toward the outer or inner side of the pipe or sealing the end of the pipe fitting;

7. Enlarged pipe fittings, which expand the ends or certain parts of the pipe fittings to form various shapes of pipe fittings according to requirements;

The above is the knowledge and tools about pipe fittings brought to you by Changzhou Machinery Processing Factory. I hope they can be helpful to you.