Application of Stainless Steel Bearing Block

The stainless steel bearing pedestal is a sliding bearing with a special structure. Its structure is simpler than that of rolling bearings. It is mainly composed of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface, which can withstand large loads. According to its different types and structures, it can withstand radial loads, axial loads, or combined radial and axial loads. Stainless steel bearing pedestals are generally used for low speed swing motions (i.e., angular motions). Due to the spherical shape of the sliding surface, tilting motions (i.e., centering motions) can also be performed within a certain angle range. They can still work normally when the bearing shaft and the shaft housing hole are not concentric enough.

Stainless steel bearing blocks are widely used in engineering hydraulic cylinders, forging machines, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, and other industries. Introduction and classification of stainless steel bearing pedestals Joint bearings are spherical plain bearings, the basic type of which consists of inner and outer rings with spherical sliding spherical contact surfaces. Depending on its structure and type, it can withstand radial loads, axial loads, or combined radial and axial loads acting simultaneously. Due to the large spherical sliding contact area and large inclination angle of stainless steel bearing blocks, most stainless steel bearing blocks also adopt special processing methods, such as surface phosphating, zinc plating, chromium plating, or external sliding surface lining, pad insertion, spraying, etc. Therefore, it has a large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self centering, good lubrication, or self lubrication without lubricating dirt pollution. It can work normally even if it is installed incorrectly. Therefore, stainless steel bearing pedestals are widely used for low speed swing, tilt, and rotational motions.